Meshbooth · Blender add-on
Turn one Blender model into a complete listing pack — in one click.
Beauty renders, spec card, clay + wire, turntable, checked GLB/FBX and stats — without setting up a studio.
Get Meshbooth · $19Launch price until October 9 · then $29 · 7-day refund
Before · BlenderAfter · Meshbooth
Model Meshbooth 9-file listing pack
9 files · one folder · your .blend is not changed
Real files from one Meshbooth 0.2.0 run on the Treasure Chest (Poly Haven, CC0), in the order Meshbooth saves them, shown sped up: that run, at 1920 × 1080 with a 240-frame turntable, took 7 minutes on our test PC. Open any file to see it.
Less setup. Better listings.
Save setup time
No studio, lights or camera to build. Meshbooth sets them up in a temporary scene and removes them when it finishes.
Get clean previews
Light and dark studio photos, a clay + wire view and a turntable, framed for you.
Export with checks
The GLB and FBX are read back and compared with your model, so you catch a mismatch before you upload.
One click from you. The rest is Blender’s work.
Meshbooth does not make Cycles render faster. It takes the setup and the repeated steps off your hands: you press one button, and Blender works through this list on its own.
- YouSelect your model, press Create Listing Pack
- Blender, on its ownAbout 4 to 6.5 minutes on our test PC
- Measures your model: triangles, vertices, materials, textures, UV maps, size in cm
- Builds a temporary studio: backdrop, camera, three soft lights, and frames your model
- Exports a GLB and an FBX, opens them again and counts them against your scene
- Photographs it in the light studio, with Cycles
- Photographs it in the dark studio
- Films a full turn: 144 frames, 6 seconds
- Saves the turn as an MP4 and a GIF
- Renders the clay + wireframe view
- Draws the spec card
- Saves the numbers in stats.json
- Removes its studio: your .blend is left as it was
- Opens the folder with the nine files
With the default settings, on an NVIDIA RTX 5080. Slower graphics cards take longer.
See it work
- I Solid view
- II Studio render
- III Turntable
What you get
Nine files in one folder, whatever you give it. Pick a model: these are the files from one Meshbooth 0.2.0 run on it, as saved, only resized for the web. Your .blend file is not changed.
LightDark
Beauty renders 2 files
Light and dark studio photos. Drag to compare.
01_beauty_light.png · 01_beauty_dark.png · 1600 × 1200
Turntable GIF + MP4 2 files
A full turn in 6 seconds, ready to post. You set the length on the panel.
04_turntable.gif · 04_turntable.mp4
Spec card 1 file
The real numbers of your model, read from your file, on one card you can post.
02_spec_card.png
Clay + wire preview 1 file
Shows your topology.
03_clay_wire.png
Also in the folder
GLB + FBX, checked 2 files
Each export is opened again and its triangles and materials are counted against your scene. On the Rubber Duck: 4,288 triangles in both files, the same as in the scene. Matches
Rubber Duck.glb · Rubber Duck.fbx
stats.json 1 file
The spec card’s numbers as a data file, for your records or your own tools.
stats.json
Meshbooth 0.2.0 output, not retouched. Sample model: Rubber Duck, Poly Haven (CC0).
Sample models: “Early medieval nasal helmet” by SebastianSosnowski and “Gislinge Viking Boat” by Opus Poly (scaled to its real size), both on Sketchfab under CC BY 4.0. All the others from Poly Haven, CC0.
Works with
- Windows 11 supported
- Blender 4.5 LTS · 5.1 · 5.2 LTS tested
- macOS coming soon
Tested on an NVIDIA RTX 5080. Linux and AMD or Intel graphics cards are not yet verified. If Meshbooth does not run on your system, you get a full refund within 7 days.
Meshbooth for Blender · version 0.2.1
$19
Launch price until October 9, 2026 · then $29
Get Meshbooth · $197-day refund, even if you just change your mind · Checkout and delivery by Gumroad
Bug-fix updates for version 0 in your Gumroad library · Email support · No account, no licence key
Questions
Will it change my .blend file?
No. Meshbooth only reads your objects. It builds its studio in a temporary scene and removes it when the run finishes, fails or is cancelled. Blender may still ask you to save when you close it, for example because you selected objects.
What do I need?
Windows 11 and Blender 4.5 LTS, 5.1 or 5.2 LTS. A graphics card turned on for Cycles makes it much faster: on our test PC (NVIDIA RTX 5080), a typical model took about 4 to 6.5 minutes with the default settings. Without one it still works, several times slower.
Does it work on Mac or Linux?
Not yet. macOS support is in development and coming soon, as a free update in your Gumroad library. Linux has not been verified yet. If you try it on a system we have not verified and it does not run, the 7-day refund applies.
What if it is not for me?
Write to info@digitalcashcode.com within 7 days for a full refund through Gumroad, even if you just change your mind.
Technical details
Tested
- Windows 11: supported
- Blender 4.5 LTS, Blender 5.1 and Blender 5.2 LTS
- NVIDIA RTX 5080 with OptiX, the only graphics card tested
- No graphics card: works, about 4 to 5 times slower on a 12-core test processor (earlier build of 0.2.0)
- Blender's interface in English, Spanish, French, German, Japanese and Simplified Chinese
Not yet verified
- macOS: support in development, coming soon
- Linux
- AMD and Intel graphics cards
- NVIDIA with CUDA instead of OptiX
- Windows 10
- Blender 5.0, and versions after 5.2
- Other Blender interface languages
Blender 4.4 and older cannot install it. Meshbooth's own panel, messages, spec card and manual are in English only.
Known limitations
- Meshbooth is made mainly for mesh-based assets. Complex setups, such as collection instances, instanced curves or text, or unusual parent hierarchies, can give differences between the renders, the GLB and the FBX. Please check the renders and both export files before you upload them.
- One camera angle per run, plus the turntable. For another angle, run it again into a different folder.
- The studio does not change: light and dark backdrops with three soft lights. Your own HDRI, background or camera are not used.
- Above 500,000 triangles or 3,000 pieces, the clay view has no wireframe.
- Glass and other transparent materials show as opaque grey in the clay view.
- Particle hair is not counted, not exported and not shown in the clay view.
- The numbers, the clay view and the exports use the viewport level of modifiers such as Subdivision. The photos use the render level.
The export check
Meshbooth exports a GLB and an FBX, reads each file back and compares its triangles and materials with your model. This is a count check. It is not a glTF specification validator. For example, Blender's FBX exporter leaves out Geometry Nodes instances: the card then says “differs” for the FBX, and the summary tells you to use the GLB or add a Realize Instances node.
Meshbooth does not check any store's image rules. Please check the rules of the store you upload to.
On our test PC (NVIDIA RTX 5080), a typical model took about 4 to 6.5 minutes with the default settings (Final quality, 144 turntable frames). Draft is quicker. Slower graphics cards take longer.
Licence, updates and install
Like Blender itself, free software under the GNU GPL (GPL-3.0-or-later). Install it on as many computers as you like. No licence key, no account, never connects to the internet. The images, videos and exports it makes from your models are yours.
When you buy, you pay for the official version from DigitalCashCode, bug-fix updates for version 0 in your Gumroad library, and email support at info@digitalcashcode.com. Not included: 3D models, Blender itself, uploading to any store.
To install: in Blender, go to Edit › Preferences › Get Extensions › the small arrow at the top right › Install from Disk, and choose the ZIP. Do not unzip it. The full manual is README.txt inside the ZIP.
Meshbooth for Blender, version 0.2.1, released September 25, 2026. It adds Blender 5.2 LTS support, and the turntable turns in 6 seconds by default.